Which BLS Model Should I Use

Which BLS Model Should I Use?

Vehicle Uses:
One vehicle used daily	BLS-12-A (this model is a battery maintainer).
Collector cars (stored)	The BatterySolver™ Package

Truck with one battery	BLS-12-A or -N
Truck, more than one battery	BLS-12/24-C
Truck or Implement 24 Volt	BLS-12/24-C

Motorcycle	BLS-12-A
Lawn Mower	BLS-12-A

Boat Uses:
Trolling battery	BLS-12-A or -N
Outboard	BLS-12-A or -N
Electric Boat 36 Volt	BLS-36-A
Electric Boat 48 Volt	BLS-48-A
Cruise Sail Boat 12 Volt Single Battery	BLS-12-A
Cruise Sail Boat 24 Volt	BLS-12/24-C
Large Power Boat 12 volt	BLS-12/24-C
Large Power Boat 24 Volt	BLS-12/24-C

Stationary Uses:
Off grid house 12 volt	BLS-12/24-C
Off grid house 24 Volt	BLS-12/24-C
Off grid house 48 Volt	BLS-48A or BLS-48-BW
Stationary Power/pump	BLS-12/24-C
Shop Use	BLS-12/24-B
Golf Carts and Electric Vehicles
36 Volt Golf Cart	BLS-36A
42 Volt Golf Cart	BLS-42B
48 Volt Golf Cart	BLS-48B
72 Volt NEV or Electric Vehicle	BLS-72A
84 or 96 Volt Electric Vehicle	BLS-84/96-Multi
120 Volt Electric Vehicle	BLS-120A
Industrial Forklifts and Lift Trucks
24 or 36 Volt Forklift	BLS-24/36-Multi-F
36 or 48 Volt Forklift	BLS-36/48-Multi-F

Connecting the Battery Life Saver electronic device

Connecting and using the BLS is very easy, just connect it and forget it! The device works off of the power of the battery, and therefore does not have to be plugged into AC power. All of the units come with two leads(wires) just like jumper cables. Some units are equipped with alligator type clips and others come with eye rings for permanent attachment to the batteries.

Example Connection

The following pictures show you how to connect the Battery Life Saver electronic device to a battery system. The example system is the same battery arrangement of a 36 volt Club Car DS, it is six 6 volt batteries connected in series.

The main positive and main negative terminals are the same battery terminals that the charger or charging source cables are connected. First connect the black wire from the Battery Life Saver electronic device to the Main negative battery terminal.

Next connect the red wire from the Battery Life Saver electronic device to the Main positive battery terminal.

The BLS is now connected and the LED be on. Finally, securely fasten (with self tapping screws or Ty Wraps) the BLS to something metallic (for example the metal frame of a golf cart).