The Battery Life Saver electronic desulfator(BLS) was invented in 2002
by a Florida resident, Charles Van Breemen. It was developed because he was
tired of batteries failing when he needed them most. He also wanted to
protect the environment from harmful battery waste. Awarded a Patent in
2008, the BLS brings old and weak batteries back to life, restores
functioning batteries to a like
new condition, and extends battery life. It keeps batteries from losing
capacity and life due to the main cause of battery failure: the
buildup of lead sulfate. There are
different models for
different sized battery systems.
Why is The Battery Life Saver electronic desulfator needed?
75% to 80% of lead acid batteries fail prematurely because of
formation of lead sulfate on the plates. These crystals cause batteries to
become unusable at approximately one-third
of their natural life. The Battery Life Saver electronic desulfator
dissolves the lead sulfate crystals.
How Does it Work?
Using breakthrough square wave technology, The Battery Life Saver
electronic desulfator sends a frequency signal to each crystal of lead
sulfate, causing it to dissolve into lead and sulfuric acid. This restores
the battery to its original condition and allows the electrical charge to be
drawn from the battery.
Benefits of Using The Battery Life Saver electronic desulfator:
It makes old batteries as good as new. It keeps new batteries like new,
saving time and money. With The Battery Life Saver electronic desulfator,
more power is available from your battery and you need less power to charge
it. By reducing the number of batteries that get thrown away and put in
landfills, The Battery Life Saver electronic desulfator protects the
environment. To see the different models, click
here.
The Battery Life Saver electronic desulfator Can be Used in Several
Different Ways:
Connecting and using the Battery Life Saver is very easy, just connect it
and forget it! Only one device is needed per battery system. The device
works off of the power of the battery (the
system should be charged regularly), and therefore does not have to
be plugged into AC power. All of the units come with two leads(wires) just
like jumper cables. Simply connect the red wire to the main positive battery
terminal and the black wire to the main negative battery terminal. Some
units are equipped with alligator type clips and others come with eye rings
for permanent attachment to the batteries.
• To restore
a dead or barely usable battery, connect the Battery Life Saver
electronic device to the battery, along with your battery charger. The
Battery Life Saver will gradually rejuvenate the battery or battery system
with every cycle(charge and discharge). With the Battery Life Saver
connected, fully charge the battery, then discharge the battery (the BLS
operates from the power of the battery, thus you can use the BLS to
discharge the battery). This
process can takea
couple cycles or many cycles depending on the condition and size of the batteryor
battery system.
• To maximize
battery life, connect
the Battery Life Saver electronic desulfator to your new battery or battery
system and let it be!
• To maintain
working batteries, install the Battery Life Saver electronic
desulfator on your battery
or on a bank of batteries. It rejuvenates the batteries while it is in
service. This causes more power to be available from the battery and causes
less power to be needed to charge the battery. This is the best way to
extend the life of your batteries. It’s like having a brand new battery
every time you use it.
Why is the Battery Life Saver electronic desulfator
"The Most Effective Desulfator Available"?
There are a number
of other electronic products available on the Internet which claim to be
desulfators. The ones known to me are “Pulse-Tech,” “De-500,” “Nano-tech,”
“BES Technologies,” and home-made circuits as described by Alister Couper.
All of these products are best described as pulsers and are based on an
approximation of a Dirac delta function. These have a serious short-coming
in that it is impossible to produce a Dirac delta in the physical universe.
It is approximated by a very rapid rise of voltage in the leading edge of
the pulse and generation of a high voltage pulse. To the degree that these
products can produce a rapidly rising high voltage spike, they can be only
somewhat effective at exciting natural frequencies of crystals. However, the
pulses are of such short durations that very little power can be delivered
to the crystal to cause it to dissolve -- again power is the area under the
curve.
The Battery Life Saver electronic
desulfator square wave
signal can excite all of the frequencies above it and is easy to produce, in
that it is a real function, meaning it exists in the physical universe. The
square wave signal is generally a low voltage signal, usually less than one
volt with most batteries, and delivers enough power to cause the crystals to
dissolve.
